Feel the Power of Perfection

Audiobahn Amplifiers have consistently raised the bar for absolute power. Take your pick from our line of Class D High Current, A/B Mosfet, True Digital and even Air Intake amps. You're sure to find the right one to blast your system into another dimension.

CLASS D SERIES

POWER EFFICIENCY
Audiobahn’s series of mono-block Class D amplifiers are specifically designed to provide raw power to drive subwoofers. These amplifiers utilize digital switching, which is a highly-efficient method for increasing power output while drawing less power from your vehicle’s electrical system. The application of this technology also gives Audiobahn’s Class D amplifiers the stability to operate at impedances as low as 1 ohm and still remain cool enough to utilize smaller heat sinks and outer chassis.

DUAL COOLING FANS
Regardless of how stable an amplifier is, heat deteriorates its functionality; keeping the amplifier cool is essential in preserving its longevity and power output. All Audiobahn Class D amplifiers feature dual cooling fans, which increase airflow to critical components on the circuit board’s surface area and help maintain the amplifier’s optimum operating temperature. Audiobahn has also designed the Class D amplifiers with chassis exhaust venting and side-rail fins to help eliminate harmful heat from sensitive inner components.

CLIPPING INDICATOR
When an amplifier is operating outside of its output threshold it can produce square waves or DC current, which can be harmful to subwoofers. This damaging circumstance is known as clipping. Audiobahn has included a digital clipping indicator on all Class D amplifiers to help ensure that you get the maximum performance out of your amplifier without sending any damaging signals to your subwoofers.

COMMON FEATURES

Multi-Stranded Power Supply Toroids
Double-Sided Glass Epoxy Circuit Board
THD: 0.05%
S/N Ratio: >100dB (+/- 1dB)
Frequency Response: 10Hz-200Hz
Remote Bass Control With Blue Backlight Knob
Input Sensitivity: 200mV ~ 8V
Variable 18dB Low-pass Crossover: 50Hz - 250Hz
Subsonic Filter: 20Hz - 50Hz
Variable Bass Boost: 0 - 18dB
Variable Bass Boost Frequency: 40Hz - 100Hz
Variable Phase Control: 0° - 180°
Large Display Volt Meter With Blue Illumination
Throughput RCA Connections
4-way Protection Circuitry: Thermal, Short Circuit, Overload, and DC Offset
Dual Cooling Fans
Cobalt Blue Illumination
Chrome Flame Fan Grilles
High Gloss Chrome-Plated Finish
nickel-plated block terminals

Remote Mount BASS BOOST CONTROL
(Included with all class D amplifiers)

Audiobahn’s remote bass boost knob gives you the power to quickly adjust the bass without changing the control functions of your head unit. (6 pin module)

Two Fan grilles INCLUDED with each set.
Optional Four FAN GRILLE designs Available for ALL CLASS D AND A/B MOSFET AMPLIFIERS.

AGTF
“Tall flame” FAN GRILLES (Set of two)
AGST
“Stars” FAN GRILLES (Set of two)
AGBH
“Biohazard” FAN GRILLES (Set of two)
AGHU
“Hustler” FAN GRILLES (Set of two)

High Currrent Amplifiers

STABILITY
Audiobahn is one of the few manufacturers to be reputed for selling power-hungry High Current amplifiers. These competition amplifiers utilize an advanced power supply to help increase the stability of their traditional AB MOSFET circuitry. This means High Current amplifiers can operate at much lower impedances and output more power than traditional AB MOSFET amplifiers. Audiobahn High Current amplifiers are stable to impedances as low as 1 ohm mono, which allows them to drive maximum power to any component in your vehicle’s sound system. Audiobahn also employs unregulated power supplies. This means the higher the voltage of your electrical system, the more power the amplifier will produce, making them ideal for competition as you can run up to a 17.9 volt system for maximum power output.

ANALOG VU METERS
Giving this series an added element of control, all Audiobahn High Current amplifiers feature analog VU meters. This visual indicator lets you see the decibel level output of your vehicle and how much power is going to the speakers. Monitoring both left and right channels, the VU meter is visible in the dark thanks to cobalt blue LED illumination, a staple of nearly all Audiobahn products.

4-WAY PROTECTION CIRCUITRY
All Audiobahn amplifiers feature 4-way protection circuitry. This protection circuitry is designed to defend the amplifiers from thermal overload, internally-contained short circuits, voltage overload and DC offset. 4-Way protection ensures that these amplifiers will continue to operate despite the “real world” mishaps that can occur in the mobile audio environment.

COMMON FEATURES

High Current Circuitry
PWM MOSFET Power Supply
Double-Sided Glass Epoxy Circuit Board
S/N Ratio: >100dB (+/- 1dB)
Frequency Response: 10Hz – 20kHz
Input Sensitivity: 200mV ~ 8V
Variable 24dB High-pass Crossover: 50Hz – 750Hz
Variable 24dB Low-pass Crossover: 30Hz – 120Hz
Variable Subsonic Filter: 20Hz - 45Hz
Variable Bass Boost: 0 – 18dB
Variable Bass Boost Frequency: 40Hz – 100Hz
RCA Throughput Connections
4-way Protection Circuitry: Thermal, Short
Circuit, Overload, and DC Offset
Dual Cooling Fans
VU Meters Indicating Output Response
Cobalt Blue Illumination
High Gloss Chrome-Plated Finish
nickel-plated block terminals

Remote Mount BASS BOOST CONTROL
(Included with all class D amplifiers)

Audiobahn’s remote bass boost knob gives you the power to quickly adjust the bass without changing the control functions of your head unit. (6 pin module)

INTAKE SERIES CLASS A/B

DIGITAL DC INPUT VOLTAGE
Audiobahn Intake Amplifiers feature an on-board cobalt blue digital volt meter. This volt meter allows you to get a quick assessment of your vehicle’s charging voltage to the amplifier. During normal operation, the display should read between 11.5V and 14.4V. A LO or HI readout indicates a problem that
requires attention.

AIR INTAKE FAN
Audiobahn has designed the Intake Series of amplifiers to be ultra-durable and allow for installation versatility. Since heat weakens the inner workings of any electrical component, particular thought was put into the placement of the air-induction groove and air intake fan. These design components help force cooler outside air into the chassis of the amplifier and help to maintain the amplifier’s optimum operating temperature.

NICKEL-PLATED BLOCK TERMINALS
To increase conductivity and maintain proper connection, nickel-plated block terminals are used. Nickel is an ideal electrical conductor. This flow of power is essential in maintaining proper current flow through power connections. This also ensures a more efficient power transfer from output terminals to speakers and subwoofers. Block terminals make a more solid and secure connection for all wires, making for a superior flow of power. Additionally, each terminal block is encased in clear acrylic to prevent short circuits and accidental wire entanglement.

COMMON FEATURES

Class A/B MOSFET Circuitry
PWM MOSFET Power Supply
double-sided Glass Epoxy Circuit Board
THD: 0.02%
S/N Ratio: >100dB (+/- 1dB)
Frequency Response: 10Hz - 40kHz
Input Sensitivity: 200mV ~ 8V
Variable 18dB Hi-pass Crossover: 50Hz - 750Hz
Variable 18dB Low-pass Crossover: 50Hz - 120Hz
Bass boost on / off
Subsonic Filter: 20Hz - 50Hz
RCA Throughput Connections
3-way Protection Circuitry: Thermal,
Short Circuit and Overload Cooling Fan
Cobalt Blue Illumination
High Gloss Chrome-Plated Finish
RCA and HIGH Level Inputs